PP-L Product Reference: AA 115

The AA 115 is a highly efficient UV-C system for air disinfection, with a flow rate of 115m3 per hour. The unit uses low-noise fans to actively route the air into the interior of the unit, so that it can be disinfected by the UV-C lamps. The device is easy to install either on a base stand or mounted on the wall or ceiling. As the AA 115 is enclosed in safe housing, it can be used 24/7 within occupied spaces, to provide a continuous flow of disinfected air.

Description

Key Benefits

Medical Grade Quality & Performance

Uses germicidal UV-C light to ensure the air is disinfected before recirculation.

Safely Decontaminate Occupied Spaces 24/7

With a flow rate of 115m3 per hour, air is continuously disinfected throughout the day .

Outperform Covid Compliance Standards

Minimises visual and noise impact

The system has low noise levels and can be installed in a variety of different positions, depending on your requirements.

Cost effective

Easy to maintain

Replacing the UV-C lamp is easy and only becomes necessary after approximately 16,000 operating hours.

Non-chemical and energy efficient

Applications

The AA 115 is ideal for use in the following areas:

How the AA 115 Works

The AA 115 is a highly efficient UV system for air disinfection. Extremely low-noise fans actively route the germ-laden air into the interior of the unit, where it flows past UV lamps. Air volume, flow speed and UV-C dosage are coordinated perfectly to achieve excellent inactivation rates.

Problems with Poor Air Quality

Without adequate ventilation or other interventions, viral loads in an occupied interior environment can build, creating a high transmission risk. This is because airborne viruses (aerosols) can spread inside due to air currents, and then be contracted through the inhalation of these aerosols.

Technical Specifications

Dimensions (mm)

600 x 600 x 100

Weight

15kg

Noise level at 1m distance

<39dB(A)

Certifications

CE

ISO 9001

ISO 14001

Warranty

The AA devices have a one-year warranty. This, however, does not cover any damage caused by misuse or any mechanical or chemical damage which is not a result of any defect in the workmanship or materials.